How Sticky Innovations Changed the World

It's easy to take for granted adhesives that are essential to our lives. Here's a look at the long, influential history of stickiness.

by Carl E. Heltzel, for ChemMatters Magazine

Image of glue
Deposit Photos

During World War II, Vesta Stoudt, who had two sons serving in the U.S. Navy, was working at the Green River Ordnance Plant near Amboy, Illinois. Her job was to help pack boxes of ammunition. This involved waterproofing the boxes by sealing them with paper tape and dipping the boxes in wax. A loose end of the tape was left sticking out so soldiers could pull on it and quickly peel off the whole strip of tape to open the package. But there was a critical problem with this technique. The flimsy tabs of paper tape often tore off, leaving the boxes sealed shut.

Under enemy fire, soldiers would have had little time to deal with the faulty tape. They needed to unseal ammunition boxes quickly, so Stoudt came up with a solution. She designed a waterproof tape made from duck cloth that was sturdier than the paper tape the army had been using. 

She proposed the idea to her bosses, but they didn’t show much interest.

Undeterred, Stoudt wrote a letter to then-President Franklin D. Roosevelt on Feb. 10, 1943. Roosevelt saw the merits of her idea and instructed the War Production Board to follow up. The Industrial Tape Corporation won the job of producing the tape in large amounts. That is how duck tape—now known as duct tape—was invented.

Today, duct tape is used to fix an amazing variety of objects not only in the military but also for everyday repairs. It has even been critical during space missions.

Stoudt’s story illustrates many things, not the least of which is that necessity is the mother of invention. It also highlights the importance of overlooked inventions that have become so common, we forget that they needed inventing in the first place.

Adhesives, of which duct tape is just one type, fall into this category. Not only have they helped solve critical, short-term problems such as packaging munitions, they’ve played crucial roles in the evolution of human culture. Sticky innovations will surely help us tackle problems that seem unsolvable today.

The original hot glue

While synthetic tapes for packing and book mending have been around for a few decades, humans took advantage of sticky materials thousands of years ago. Archaeological evidence suggests that glue goes back to the early-human and Neanderthal days. Starting as far back as 200,000 years ago during the Paleolithic Period, glue was likely made by heating birch bark to make a sticky tar, a natural polymer. There are a variety of tars, and all of them are a mixture of hydrocarbon molecules and carbon. When heated, the molecules form thermoplastic polymers, meaning they soften when heated and solidify as they cool.

Tar is also thermoplastic. At room temperature, birch tar is solid, but warm it up to 29 °C (85 °F), and you can mold it like putty. When cooled, the tar hardens and can hold two things together. It can also be heated again for reuse.

Archaeologists have found evidence that tar was used for hafting—that is, attaching stone blades to wooden handles—which represented a toolmaking advancement for early humans.

Mortar is another adhesive that has been used throughout history. The main component of mortar is limestone (calcium carbonate, CaCO3), which is often composed of the skeletal remains of marine organisms.

When heated, added to water and mixed with sand, limestone produces lime mortar. When lime mortar reacts with carbon dioxide (CO2) in the air, it hardens into limestone, binding together the materials it’s in contact with. Lime mortar was used to bond together stone in ancient structures, including the Egyptian pyramids and the Great Wall of China.

Additives, specifically organic, protein-like materials such as ox blood were sometimes mixed into the lime mortar to enhance its performance.

Early adhesives based on animal or plant materials were strong, and many examples of structures built with these natural glues are still standing today. But ultimately, advances in technology, medicine, and culture created opportunities to invent more versatile modern adhesives, such as surgical, electrical, and gift-wrapping tapes.

the lime cycle
RS Graphx, Inc.

Sticking with Limestone

Limestone has played a key role in the construction of some of the world’s most iconic structures. The process of making it is a cycle of the following reactions:

It starts with heating solid limestone, CaCO3, to form calcium oxide, CaO.

CaCO3(s) + heat → CaO(s) + CO2(g)

 Water is added to form lime putty, or calcium hydroxide, Ca(OH)2.

H2O(l) + CaO(s) → Ca(OH)2(s)

Over time the calcium hydroxide reacts with CO2 from the air to harden into limestone.

Ca(OH)2(s) + CO2(g) → CaCO3(s) + H2O(g)

Synthetic stickiness

Today, manufacturers don’t have to heat birch or collect ox blood to make glue or adhesive backing on tapes. Instead, they process tacky materials in manufacturing plants.

Acrylate-based polymers are commonly used to make sticky materials. Similar to all polymers, acrylate polymers are large molecules consisting of many identical, repeating units. Poly(n-butyl acrylate) is a typical acrylate polymer used in adhesives. It’s made by polymerizing the monomer n-butyl acrylate.

n-butyl acrylate undergoes polymerization to create poly n-butyl acrylate
RS Graphx, Inc.

These polymers are often the sticky component in tape. The principle of how tapes work appears straightforward: Many tapes that you might use, such as transparent Scotch tape, consist of a backing material that is coated on at least one side with a layer of a pres- sure-sensitive adhesive. It’s pressure sensitive because you have to apply a light force to make it stick effectively.

Contact between tape and an object such as a wall produces intermolecular forces. Pressing down on the tape causes the adhesive to start filling in the rough surface of the object, creating more intermolecular forces.  The intermolecular forces spread over an even wider area.

Cohesive forces prevent the sticky layer from coming apart. Adhesive forces between a piece of tape and an object hold the two pieces together.   

Zoom in to the molecular level, and you’ll find that tape stickiness relies on the balance between adhesive and cohesive forces. Adhesive forces are attractions between molecules in different substances. Cohesive forces are attractions between molecules in the same substance. To better understand these two forces, consider a drop of rain on a car windshield. Adhesive forces between the water molecules and the glass hold the water in place. Cohesive forces occur between water molecules and hold them together in a droplet. Without cohesive forces, the water molecules would spread out on the glass.

In many tapes, adhesive forces involve van der Waals forces. In order for tape to stick to a surface, van der Waals forces must be established between the molecules in a piece of tape and the molecules or atoms at the surface. Because van der Waals forces are distance-dependent and vanish as the distance between molecules increases, applying a light force on a piece of tape with your finger pushes the adhesive and surface molecules close enough together to establish van der Waals forces and cause the tape to stick. Cohesive forces between the molecules within the tape’s adhesive layer are important as well. If the cohesive forces are too weak, the molecules within the adhesive layer would “let go” of each other, and the poster would fall to the floor.

How Tape Works

illustration 1 - how tape works


Contact between tape and an object such as a wall intermolecular forces.

illustration 2 - how tape works



Pressing down on the tape causes the adhesive to start filling in the rough surface of the object, creating more intermolecular forces.

illustration 3 - how tape works
RS Graphx, Inc.

The intermolecular forces spread over an even area. Cohesive forces prevent the sticky layer from coming apart. Adhesive forces between a piece of tape and an object hold the two pieces together.

Back to nature

Sticky chemistry is pretty well established. But there are still things most synthetic adhesives can’t do.

The pressure-sensitive adhesives used in tapes have a small amount of flow that allows them to interact with surfaces. The van der Waals interactions between the adhesive and the surface are strongest when the atoms have a higher energy at the surface than in the bulk material—think a recently-cut surface in which the atomic bonds have been disrupted. Materials with higher surface energy include metals, glass, acrylic, and nylon. In contrast, polypropylene and Teflon have low surface energy, which is why Teflon doesn’t stick to things.

Anything that interferes with the flow or van der Waals interactions of the adhesive reduces its stickiness, such as deep cuts (which reduce the amount of surface the adhesive can reach) or water (which has stronger interactions with the adhesive and surface).

Consequently, most synthetic adhesives are not very good at making things stick together underwater. To advance sticky chemistry even further, scientists are again looking to nature for inspiration. Living organisms often secrete adhesives for attachment, construction, defense, and predation. They have the benefit of millions of years of evolutionary experience in developing their “products.” Species such as mussels and barnacles do this easily—even under harsh conditions.

Unlike early humans’ adhesives, however, new solutions probably won’t involve using animal and plant products but will mimic them. For example, reseachers at Purdue University created a biomimetic synthetic polymer after examining mussels’ protein-based adhesives. Mussels use tiny hair-like fibers covered in an adhesive to attach to surfaces. The mussel’s glue contains the amino acid dihydroxyphenylalanine (DOPA), which gives it a unique adhesive strength. DOPA contains a catechol, which consists of two hydroxyl groups sticking out from a benzene ring. The catechol group interacts with surfaces, such as rocks, through intermolecular forces including hydrogen bonding. The catechol group can also form covalent bonds with metals if present in the surface material. By combining the chemistry of mussel proteins and DOPA into a new polymer, the Purdue researchers created a strong underwater adhesive.

Slug slime, starfish, and gecko feet have also inspired the development of sticky experimental products. Researchers say that one day these biomimetic adhesives could help surgeons fix organs or help astronauts walk on the outside of a spacecraft!

What amazing adhesive applications can you imagine?

Getting rid of unwanted adhesives

molecular structure of limonen

Peeling price-tag stickers off newly purchased books, mugs, and binders often leaves a gummy residue behind. Scraping off the tacky adhesive with a fingernail doesn’t always do the trick, but there’s another way to remove the stickiness. 

Remember the rule of thumb: “Like dissolves like”? That is, polar substances dissolve in polar media, and nonpolar substances dissolve in nonpolar media. The residue from price tags and labels is typically made of nonpolar, polymeric molecules. So, nonpolar products will dissolve the nonpolar residue, which would allow you to remove it from your new purchase. For example, limonene, a naturally occurring compound in oranges, is a nonpolar organic molecule that is often used in cleaning products.

Unsticky Hack 


  • one part baking soda (sodium bicarbonate, NaHCO3, as an abrasive agent; it also helps make a non-runny paste)
  • one part melted coconut oil (rich in nonpolar fatty acids of medium size; excellent for dissolving nonpolar goo)
  • sweet orange oil (or other citrus essential oils)

Combine ingredients, adding just enough baking soda to the coconut and orange oils to make a paste. Apply the paste. Wait an hour or two, and peel or scrub off the adhesive!